Mistakes made during facade repairs can be costly

A lot depends on how correctly the work on the arrangement of the facade will be carried out. Therefore, all issues regarding the selection of materials and the choice of the cladding method are resolved at the design stage. Increased attention is paid to the formation of protective layers that allow moisture retention, heat storage, and also provide free ventilation of air.

Do not forget about the aesthetic component - the facade of the house should ideally fit into the picture of the general exterior of the site.

Basic materials for facing works

If not so long ago the most popular option for house cladding was plaster, now the range of materials has expanded significantly:

• clinker brick;
• tiles;
• thermowood;
• granite tiles;
• thermopanels;
• decorative siding.

As for the plaster itself, it is used in a wide variety of types - mineral, acrylic, silicone, silicate.

Installation of any type of material necessarily implies the use of the technology provided by the manufacturer. Incorrect installation can lead to rapid damage to the building structures and loss of the required performance properties of the facade.

The correct selection of the surface color is also important. For example, it is recommended to paint the base in dark shades. The edging is done in the same tones as the walls. To visually enlarge the house, the facades are covered with light colors, to reduce - dark ones.

Mistakes in facade repairs – what to pay attention to

When preparing the surface for painting, it must be thoroughly dried. The presence of moisture will lead to stains and cracks in the future. Thus, the color will be uneven, and the building itself will look untidy. Other mistakes that are worth paying attention to are the following:

• Incorrect treatment of stone with special mixtures to protect against moisture. If this is not done, then soon cloudy streaks from precipitation and "efflorescence" will form on the facade.
• Using foam plastic as insulation. It is better not to use this material to create an insulating layer, since it does not allow air to pass through.
• Installing a drain without chasing the wall. In this case, the flowing water will penetrate inside the facade. The problem can be corrected by forming a recess in the stone or brick wall.
• Errors in installing the facade mesh. The work process involves installation with complete closure of the facade. At the top, the mesh is attached to scaffolding posts or a cable with brackets.
• Incorrect choice of finishing materials. For example, a combination of laminate and tiles will look ridiculous and will definitely spoil the appearance of the facade.
• Lack of distance between the facade cladding and the insulating material. Only a correctly executed format allows you to achieve a ventilation effect, as a result of which mold will not form on the facade.
• Installation of insulation without vapor barrier. Do not forget about a special film or membrane that will protect the insulation from condensation and moisture.
• Wrong choice of type of repair. By replacing major repairs with cosmetic ones, you can save time and money. However, you will still need to invest more later, since in the process you will have to go through all the layers of the facade.

It is also important to consider the temperature conditions at which the building is operated. Non-compliance with the manufacturer's recommendations may lead to gradual destruction of materials.

It is not recommended to start repair work without first creating a project. Its presence allows you to accurately determine the selection and quantity of materials, avoid unnecessary expenses and perform all work according to the agreed plan.

Another common mistake is the decision to do repairs yourself without construction skills. Often, homeowners think that they can handle the process themselves, listening to the opinions of non-professionals. Therefore, the best solution for you will be to contact the construction company "RSK ALBA", which provides such services. Specialists will help with the choice of material and color, make calculations, perform all stages of work taking into account technologies.